User’s manual · TWSQ 310 CI
- 3 - TWSQ 310 CI version_en_1.0 FTE maximal
Stages of transmodulator TWSQ 310 CI
Input 1 Input 2
Selection of a tuned satellite transponder
Transmodulation
TP 1
TP 2
The tuned channels of the transponders are modulated according to the DVB-C rules in two multiplex. In cases where the
transponder has encoded channels, if you wish to distribute them freely, you will have to link a subscriber card
to each one of the two outputs of the multiplex.
Out
Configuration of the channel and the output parameters of the multiplex. The channel of the second multiple will be set
by default as the consecutive channel of the one in the first multiplex.
1.4.
Programming
TWSQ 310 has two ethernet connectors. In order to make the programming of the module you have to connect the
corresponding programmer to PRO 201 connector.
You can make the programming through the PRO 201 programmer and also through the mediaMAX EVO and mediaMAX
MINI field strength meter.
1.4.1.
Programming modes
With mediaMAX EVO / mediaMAX MINI field strength
meter you can carry out the programming of all the
modules consecutively as long as they are interconnected
with each other through the RJ-45 cable supplied with
each unit.
Through PRO 201, the programming is made module by
module.
Summary of Contents for TWSQ 310 CI
Page 1: ...TWSQ 310 CI USER S MANUAL...
