User’s manual · TWSQ 310 CI
- 15 - TWSQ 310 CI version_en_1.0 FTE maximal
- Read log: It allows reading the registered events in the module.
1. Select the option “Read LOG file”
through Up/Down buttons. Press OK
to continue
2. Press OK again to show the log file. 3. A new window will appear. It will
show the information about the
registered events in the module. Press
the following keys in order to scroll up
and down the screen: “up/down”.
- Delete LOG file: It allows deleting all events stored until this moment.
- Factory default: This option restores the values by default of the transmodulator.
- Update FW: It allows carrying out the firmware update from the programmer.
-
(1)
Network Name: Name associated with the net.
-
(1)
TSID: Transport Stream identification value. It is recommended to configure a value different from TS ID for each one
of the output multiplex configured.
-
(1)
NID: Net identification value
-
(1)
ONID: Original net identification value
-
(1)
Output services: This option allows making the selection of the services that you wish to include in the output multiplex.
Once you have tuned a transponder and you have selected the DVB-T/DVB-H modulator configuration, you can make the
assignment of the services that are going to be included in the output multiplex “Adding/Removing services”.
- Add Services
1. Select the option “Add services”
through Up/Down buttons. Press OK
to continue.
2. Select one of the transponder
services you want to add, through
Left/Right keys and select the “+Add”
button to include the service in the
multiplex
3. A window will appear and it will let
you know that the operation made has
been correct.
- Delete Services
1. Select the option “Delete services”
through Up/Down buttons. Press OK
to continue.
2. Select the service you want to
delete with the Left/Right keys. Then
press OK over “-Rem” in order to
remove it, or press OK over “--All” in
order to delete all the services of the
multiplex.
3. A window will appear and it will let
you know that the operation made has
been correct.
Note: It is not recommended to exceed the 85% of the maximum capacity of the multiplex due to the possible
variability of the bits rate of the inputs services.
Note:
(1)
You have to select in which one of the two modules you want to make the configuration in each case.
TWSQ310CI
Operation finish
TWSQ310CI
Input 083 %
PID:06000 Das Erste
-Rem --All
TWSQ310CI
BW usage 083%
>Delete services
Add services
TWSQ310CI
Operation finish
TWSQ310CI
Input 035 %
PID:06200 arte HD
+Add
TWSQ310CI
BW usage 000%
Delete services
>Add services
TWSQ310CI
N:00001 Status:03
07/02/11 09:05:02
Front-end lock
TWSQ310CI
OK to Show LOG
TWSQ310CI
LCN
>Read LOG file
Delete LOG file
Summary of Contents for TWSQ 310 CI
Page 1: ...TWSQ 310 CI USER S MANUAL...
