![FTE Maximal Nebula 8S User Manual Download Page 37](http://html1.mh-extra.com/html/fte-maximal/nebula-8s/nebula-8s_user-manual_2341196037.webp)
User’s manual · Nebula
Reserved for technical modifications and/or errors
-
17
-
Nebula
Version en_2.1 FTE maximal
3.6 SAT menu
Satellite configuration is only available for Nebula 8S
Allows change all setting of the amplifier for satellite signal. The Nebula 8S can amplify the
signal of one polarity and band of a satellite. These parameters are programmable from the
control panel so a "single" type LNB can be used.
Supply
When you enter the SAT submenu, the "Supp" screen appears which is used to enable or
disable the power of the satellite module. By default it is disabled (
off
) and the rest of the
SAT module settings do not appear.
To configure the satellite module, first of all activate the option Supp (
on
)
You can then access the following options:
-
EQ
: Satellite signal equalization
-
Gain
: adjustment of gain
-
Pol
: polarity assignment
-
Band
: band assignment
Press
OK
to edit the Supp option and change the value to (
on
) with the keys. Confirm pressing
OK
again.
Press to access the next screen.
Equalizer
The "EQ" screen activates or deactivates the frequency equalization of the satellite band,
thus compensating for the attenuation of the signal level at the higher frequencies.
If you select (
on
) the equalization of 9dB is activated and selecting off is disabled.
Press
OK
to edit the value and keys to change. Then press
OK
to confirm.
Press to access the next screen.
Gain
Here you can adjust the gain regulation of the satellite signal, from 0 to 20 dB.
Press
OK
to edit the value and keys to change. Then press
OK
to confirm.
Press to access the next screen.
Polarity
In this option you can select the polarity of the satellite, selecting the voltage that is sent to
the LNB. Available Options:
-
0V: Does not send voltage to the LNB
-
14V: Vertical polarity
-
18V: Horizontal polarity
Press
OK
to edit the value and keys to change. Then press
OK
to confirm.
Press to access the next screen.
Band
In this option you can select the satellite band, activating or deactivating the 22KHz tone.
Options:
Hi
(high band) or
Low
(low band).
Press to return to the first screen of SAT submenu or
ESC
to go back to the main menu.
<SAT>
SAT ^
Supp off
SAT ^
Supp on
SAT ^
EQ on
SAT ^
Gain 20
SAT ^
Pol 14V
SAT ^
Band Low