User’s manual · PVR T150
Technical changes and mistakes reserve
-
27
-
PVR T150 Version 1.1
FTE Maximal
7.4. TV Settings
Here you can adapt your receiver to your TV set and you can select
the screen format.
TV-System
Select here which TV system your TV set support.
Selection:
NTSC
,
PAL
,
Secam
and
AUTO
Please change with the buttons
.
TV-Format
Select here which TV format your TV set has available.
Selection:
4:3
,
16:9
and
AUTO
, please change it with the buttons
.
Picture Format
This option is only available when you have not selected
TV format
in mode
AUTO
.
Options:
Pan&Scan
or
Letter Box
, please change with the buttons
.
In this option you can choose how the pictures in films with a big format will be adapted to your TV set.
If you select
Pan&Scan
you will see one part of the film and at the left and right sides it will be cut
In
Letter Box,
the picture will become smaller and you will see on top and bottom two black bars.
TV output
This option allows choosing how the receiver will send the colours to the TV set.
Selection:
CVBS
or
RGB
, please change with the buttons
.
Loop VCR
Here you select the priority of an external video signal.
If you have selected
Slave,
the receiver shows every time the signal coming from the VCR Scart connector, when there
is signal available. It also can be a signal from DVD player or recorder.
If you have select
Master
, the signal from receiver has priority and you will see only the signal from connector VCR
scart when the receiver is in Standby mode.
INFO:
This receiver has a special LPC mode for saving current. If you select
Slave
the LPC mode will be disabled.
Selection:
Master
or
Slave
, please change with the buttons
.
LPC Mode
This receiver has a special LPC mode for saving current. This reduces the consumption in Standby mode.
Please check your settings in menu
Loop VCR
. In the LPC mode, the antenna signal keeps cut at the output
TO TV
,
so if you use the antenna signal to watch the TV through the receiver, you should disable it.
Selection:
ON
or
Off
, please change it with the buttons
.
The LPC function has 2 consequences. The first one is the time it delays to switch from Stand By to working mode, and
the second one is that in this mode, the signals which has to pass through the tuners or the modulator are attenuated
because off the unfeeding from the main board. If whatever of these 2 effects are disturbing you during the use of your
PVR, just disable this function.
Sleep
If you want shut down the receiver automatically, you can choose here the time for the sleep timer.
Selection:
15
,
30
,
45
,
60
,
75
,
90
,
105
,
120
or
Sleep
Off
Please change it with the buttons
.
