User’s manual · PVR T150
Technical changes and mistakes reserve
-
11
-
PVR T150 Version 1.1
FTE Maximal
This receiver has a main switch at the back panel of the receiver.
If a message “short-circuit” in shown, you have a short-circuit in your antenna system.
Please check it and restart the receiver.
When you set up the system for the first time, the current date will be stored in
Menu
>
System Settings
>
Version
as beginning date for the warranty period.
Step 2: Main settings on receiver
When you start the first time the receiver or when you execute a “factory default” process, you will see this
installation guide in English language.
The selection of the menu options will be done with the arrow buttons
,
and the button
OK
of the remote control.
Please, choose the code for your remote control in the first window.
Fte Maximal gives you the possibility of using a DVB-T and a DVB-S
receivers at the same time.
For this purpose, your new DVB-T receiver is selected by factory with code 2.
Please press now the button
Code
on your remote control until the
LED at the middle is lighting.
If you have problems with remote control devices, you can change
the transmission code if you go to
Menu
>
System Settings
>
OSD Settings
after finishing the quick installation guide.
Menu Language:
Here you have to select the language for the Receiver menu and information.
Select the language with the arrow buttons
and press the
OK
button.
Time Zone:
In order to the receiver is able to display the correct time and adjust the timer
recordings correctly, it is needed to fix the time zone to the place you live.
Select here the time delay according to your position comparing to
Greenwich Time.
In UK:
Summer time: +1 hours
Winter
time:
GMT
hour
Select with the arrow buttons
and press the
OK
button.
5V Supply for active antennas:
When you use an active DVB-T antenna which needs 5VDC supply,
you must activate this option here.
Select with the arrow buttons
the option 5V and press the
OK
button.
