FT Technologies FT742-D-SM, User Manual

Page: 38 / 75

Section 7 Parameter Settings
38
FT742-SM (RS422 & RS485) Sensors
– User Manual
7.1.2 Query Commands
Figure 27 lists the commands that may be sent to the sensor from the host computer that are used to QUERY
the wind sensor
’s latest readings or configuration.
Command Mnemonic Sensor Data Returned Section
Anemometer Mount AM
Normal
Inverted
7.4.1
Acoustic Temperature AT
Temperature
Temperature Units (°C, °F, K)
Filter time period 7.4.2
7.4.3
7.4.4
Serial interface baud rate BR 1200, 2400, 4800, 9600, 19200, 38400 7.4.5
Compass Settings CF
Enabled or Disabled
Compass status
000.0° to 359.9°
7.4.6
Continuous update
CU
Enabled or Disabled
Update interval (0.1 - 6000 seconds)
(operating CU mode using RS485 requires
V7.4 or above)
7.4.7
Wind velocity data format DF Polar or NMEA 7.4.8
Runtime Counter DG Number of hours of runtime 7.4.9
Command delay interval DL 00 to 20 7.4.10
Error report ER Factory Report 7.4.11
Wind velocity filter FL
Enabled or Disabled
Speed filter length, 1-64
Direction filter length, 1-64
7.4.12
7.4.13
Selective Filter FL
Enabled or Disabled
Validity Period
7.4.14
Heater settings HT
Setpoint Temperature, 0°C to 55°C.
Percentage of heater current, 0% to 100%
Internal sensor temperature, 00°C to
±99°C,
Heater Delay Time, 4s to 999s
7.4.15
7.4.16
Listener and talker identifiers ID
Listener ID = xx
Talker ID = xx
7.4.17
Min/Max wind speed MM Min and Max Speeds Recorded 7.4.18
Overspeed Warning Status OS Enabled or Disabled 7.4.19
Serial Number SN Serial Number 7.4.21
Software Version SV Software Version 7.4.22
User Calibration Table UC
Enabled or Disabled
Wind speed table record
Table label
7.4.23
7.4.24
7.4.25
7.4.26
7.4.27
Saved User Parameters US Matches Saved to Current User Parameters 7.4.28
Wind velocity reading WV Wind Speed, Direction and Sensor Status
7.4.29
7.4.30
Figure 27: Query Commands