5
FT205EV Wind Sensors
– User Manual
Safety Instructions
English
•
To ensure the safe installation and operation of this product the equipment must be installed and
integrated:
o
Using suitably qualified and trained personnel
o
In accordance with any regional electrical codes
o
In accordance with the instructions set out in this manual, observing all information, warnings and
instructions
o
In accordance with any other instructions or guidance FT Technologies provide
o
Following applicable regional safety standards
•
To ensure that the product remains compliant with electrical safety requirements it should be:
o
Connected to an appropriately approved isolated power supply, rated 6-30VDC and be current
limited (0.2A Maximum)
o
Protected by surge protection devices
o
Connected using an appropriate interface cable
•
The equipment must only be operated within the range of the specified technical data and used for the
purposes for which it was designed.
•
The equipment should always be transported in packaging which is appropriate, that will prevent any
accidental damage from occurring.
•
Always ensure that any failures or errors from the product cannot cause any damage to any other
equipment or property or cause any other consequential effects.
