TYPICAL APPLICATION with the HUB and multiple Receivers
PC VIDEO
INPUT
LOCAL MONITOR
OUTPUT
PC VIDEO OUTPUT
“EQ” ADJUST
POWER INPUT
RJ45
CAT5 INPUT
MMTD-RGBRX
POWER SUPPLY
POWERS BOTH TRANSMITTER
AND RECEIVER
ALTERNATE
POWER SUPPLY
LOCATION
RJ45
POWER
CAT5
OUTPUT
MMTD-RGBTX
FRONT VIEW
REAR VIEW
FRONT VIEW
REAR VIEW
TOTAL CAT5 CABLES
RUN SHOULD NOT
EXCEED 1000'
TYPICAL APPLICATION showing a single Transmitter and
Receiver link
TECHNICAL SPECIFICATIONS
Video Input
Number/Type:
1 RGBHV, RGBS, RGsB, RsGsBs, component
video,
S-video, HD - 15 female connector
Impedance: 75 Ohms
Output Offset:
+/-20 mv
Level (nominal): Analog 0.7V p-p
Level (maximum): 1.5V p-p
Local Monitor Output
Number/Type 1 HD - 15 female connector
Gain
Unity
Offset voltage +/- 6 mv max
Bandwidth 300 MHz
Sync output
Level 5V p-p into HiZ, 2V into 75 ohms
Impedance 75 ohms
Video Output
Number/Type:
1 RGBHV, RGBS, RGsB, RsGsBs, component
video,
S-video, HD - 15 female connector
Gain:
Unity (buffered)
Impedance: 75 Ohms
Power
Receiver/ Transmitter only
Input
100-240 VAC, 50-60 Hz
Output
24 VDC @ .5 Amp
Hub (This supply is required when using a hub. It replaces the Receiver/
Transmitter Supply)
Input
100-240 VAC, 47-63 Hz
Output
24 VDC @ 3 Amps
General
Enclosure
Transmitter Metal 4.7"W x 4"D x 1.31"H
Weight: 1.05lbs.
Receiver
Metal 4.7"W x 4"D x 1.31"H
Weight: 1.05lbs.
Hub
Metal 8.47"W x 4.75"D x 1.59"H Weight: 1.6 lbs.
UTP cable wiring standard: EIA / TIA-568B
Recommended Transmission range: 0-1000 ft. for resolutions up to 1600
X 1280 @ 60 hz.
Skew compensation Option Specifi cations (MMTP-200S):
Skew compensation adjust:
Three 16 position rotary switches
for RGB skew adjustment