background image

INTRODUCTION

The all new TWISTER, MMTP SERIES, which includes three pieces 
of equipment, an  MMTP-100 COMPUTER/RGB TRANSMITTER, 
an MMTP-200 COMPUTER RGB RECEIVER, and when required an 
MMTP-300 1 X 8 HUB  were designed  for applications requiring the 
transport  of video over long distances on Cat 5 type cable.

The Receiver has an equalization control to permit fine tuning of the 
displayed image.

Cable runs of up to 1000 feet are within the capabilities of the product.

The  MMTP-200S skew compensating receiver option is recommended 
in any image critical RGBHV application over 200 feet, and all RGBHV 
applications over 500 feet. There are three, 16 position rotary switches 
for RGB skew adjustment on this option. 

The MMTP-300 HUB is available to drive up to eight additional 
Receivers. Up to three hubs can be cascaded to expand out to additional 
receivers.  It includes a larger power supply to power all transmitters, 
receivers and the Hub itself.

When this equipment is used the original signal will arrive at the far 
end of the cable with an almost immeasurable amount of loss and / or 
distortion.

FEATURES

• Computer compatible sychronizing circuitry
• HD-15 female connectors for the input and output 
• CAT-5 connections are via RJ-45 Connectors (EIA/TIA-568B)
• Full cable equalization control for the output channel
• Compatible with all computer standards
• UL and CSA approved external power source (wall plug-in) 

APPLICATIONS

• Boardrooms • Houses of Worship• Control Rooms

• Classrooms• Staging and Rental

Summary of Contents for TWISTER MMTP-100







Reviews: