background image

REGULATORY COMPLIANCE

FSR'S ELECTRONIC PRODUCTS have been tested for compliance with: FCC Class A and CE The 
Power Adapter has been tested for compliance with: UL, CSA and CE.

WARRANTY POLICY

This product is warranted against failures due to defective parts or faulty workmanship for a period of 
one year after delivery to the original owner. During this period, FSR will make any necessary repairs or 
replace the unit without charge for parts or labor. Shipping charges to the factory or repair station must 
be prepaid by the owner, return-shipping charges, via UPS / FedEx ground, will be paid by FSR.

This warranty applies only to the original owner and is not transferable. In addition, it does not apply 
to repairs done by other than the FSR factory or Authorized Repair Stations.

This warranty shall be cancelable by FSR at its sole discretion if the unit has been 
subjected to physical abuse or has been modifi ed in any way without written authorization from FSR. 
FSR’s liability under this warranty is limited to repair or replacement of the defective unit.

FSR will not be responsible for incidental or consequential damages resulting from the use or misuse 
of its products. Some states do not allow the exclusion of incidental or consequential damages, so the 
above limitations may not apply to you. This warranty gives you specifi c legal rights, and you may also 
have other rights which vary from state to state.

Warranty claims should be accompanied by a copy of the original purchase invoice 
showing the purchase date (if a Warranty Registration Card was mailed in at the time of purchase, this 
is not necessary). Before returning any equipment for repair, please read the important information 
on service below.

SERVICE

Before returning any equipment for repair, please be sure that it is adequately packed and cushioned 
against damage in shipment, and that it is insured. We suggest that you save the original packaging and 
use it to ship the product for servicing. Also, please enclose a note giving your name, address, phone 
number and a description of the problem.

NOTE: All equipment being returned for repair must have a Return Authorization (RMA) 
Number.

 To get a RMA Number, please call:

FSR Service Department (973-785-4347). 

Please display your RMA Number prominently on the front of all packages.

Contact Information:

FSR Inc.

244 Bergen Boulevard, 

West Paterson, NJ  07424 

Tel: (973) 785-4347 · Fax: (973) 785-4207

E-Mail: [email protected] · Web: 

http://www.fsrinc.com

TWISTER 2

DATA /IR TWISTED PAIR

TRANSMITTER  T2-DTXW

RECEIVER  T2-DRX

OPERATION  MANUAL

LIT1214

A

FSR

43919

Summary of Contents for TWISTER 2

Page 1: ...Some states do not allow the exclusion of incidental or consequential damages so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Warranty claims should be accompanied by a copy of the original purchase invoice showing the purchase date if a Warranty Registration Card was mailed in at the time ...

Page 2: ...rd Use only the power cord and connector specified for your product Use only a power cord that is in good condition Refer cord and connector changes to qualified service personnel Do Not Operate in Explosive Atmospheres To avoid explosion do not operate this product in an explosive atmosphere TECHNICAL SPECIFICATIONS RS 232 DATA INPUT Number Type 1 DB 9 female connector DCE type connection for dir...

Page 3: ...Cat 5 5E 6 type cable Cable runs of over 1000 feet are within the capabilities of the product These high quality devices ensure reliable error free data transmission that is immune to interference from electrical noise FEATURES RS 232 Data Transmission DB 9 female connectors for the inputs and male for outputs UTP connections are via RJ 45 Connectors EIA TIA 568B Compatible with RS 232 standards U...

Page 4: ...SERIAL OUT DB 9 male port See pinout IR Control Installation Confirm and observe polarity on all external devices before proceed ing Connect the IR output device to the 3 5mm jack on the face of the T2 DTXW Transmitter Connect the IR emitter s to the pluggable phoenix connector on the T2 DRX Receiver using the wiring diagram provided Emitters are available from FSR Use FSR part number 28397 Once th...

Reviews: