FSR T2-CATXW Operation Manual Download Page 2

PROPRIETARY INFORMATION

All information in this manual is proprietary to and the 
property of FSR inc. This publication is protected by the Federal 
Copyright Law, with all rights reserved. No part of this document 
may be reproduced, transcribed, or transmitted, in any form or by 
any means, without prior explicit written  permission from FSR 
Inc.

Operators Safety Summary

The general safety information in this summary is for operating 
personnel.

Read Instructions 

Read and understand all safety and operating 

instructions before using this equipment. Keep the instructions 
handy.

Do Not Remove Covers or Panels 

There are no user-serviceable 

parts within the unit. Removal of the top cover will expose 
dangerous voltages. To avoid personal injury, do not remove the 
top cover. Do not operate the unit without the cover installed.

Power Source 

This product is intended to operate from the  

specifi ed wall plug-in transformer.  Do not use any other power 
source.

Grounding the Product

 This product is grounded through the 

grounding conductor of the power cord. To avoid electrical shock, 
plug the power cord  into a properly wired receptacle before 
connecting to the product input or output terminals.
 

Use the Proper Power Cord 

Use only the power cord and 

connector specifi ed for your product. Use only a power cord that is 
in good condition. Refer cord and connector changes to qualifi ed 
service personnel.

Do Not Operate in Explosive Atmospheres 

To avoid explosion, 

do not operate this product in an explosive atmosphere.

REGULATORY COMPLIANCE

The Power Adapter has been tested for compliance with: UL, CSA and CE.

WARRANTY POLICY

This product is warranted against failures due to defective parts or faulty workmanship for a period of 
three years after delivery to the original owner. During this period, FSR will make any necessary repairs 
or replace the unit without charge for parts or labor. Shipping charges to the factory or repair station must 
be prepaid by the owner, return-shipping charges, via UPS / FedEx ground, will be paid by FSR.

This warranty applies only to the original owner and is not transferable. In addition, it does not apply 
to repairs done by other than the FSR factory or Authorized Repair Stations.

This warranty shall be cancelable by FSR at its sole discretion if the unit has been 
subjected to physical abuse or has been modifi ed in any way without written authorization from FSR. 
FSR’s liability under this warranty is limited to repair or replacement of the defective unit.

FSR will not be responsible for incidental or consequential damages resulting from the use or misuse 
of its products. Some states do not allow the exclusion of incidental or consequential damages, so the 
above limitations may not apply to you. This warranty gives you specifi c legal rights, and you may also 
have other rights which vary from state to state.

Warranty claims should be accompanied by a copy of the original purchase invoice 
showing the purchase date (if a Warranty Registration Card was mailed in at the time of purchase, this 
is not necessary). Before returning any equipment for repair, please read the important information 
on service below.

SERVICE

Before returning any equipment for repair, please be sure that it is adequately packed and cushioned 
against damage in shipment, and that it is insured. We suggest that you save the original packaging and 
use it to ship the product for servicing. Also, please enclose a note giving your name, address, phone 
number and a description of the problem.

NOTE: All equipment being returned for repair must have a Return Authorization (RMA) 
Number.

 To get a RMA Number, please call:

FSR Service Department (973-785-4347). 

Please display your RMA Number prominently on the front of all packages.

Contact Information:

FSR Inc.

244 Bergen Boulevard, 

West Paterson, NJ  07424 

Tel: (973) 785-4347 · Fax: (973) 785-4207

E-Mail: [email protected] · Web: 

http://www.fsrinc.com

Summary of Contents for T2-CATXW







Reviews: