background image

4

FORK SETUP INFORMATION

WARNING! The Safire frames are compatible ONLY with single crown forks that have 

travel of 5.5” (140mm) or less. 

Use of different styled forks or forks with longer travel 

may result in catastrophic failure of the frame which may result in serious personal 

injury or death.

Certain Specialized frames and forks are equipped with tapered head tubes with a 

1 1/8” upper bearing and a 1.5” lower bearing.

LOW POSITION 1.5” BEARING

1.  Aftermarket brand fork with a 1 1/8” steerer tube

 

„

Low position bearing adapter (Part # 2001-9010)

 

„

1 1/8” Campy-style bearing

 

„

Crown race

2. Aftermarket brand fork with 1 1/8” to 1.5” tapered steerer tube

 

„

1.5” lower bearing (part # S092500001)

 

„

Crown race (part # S092500005)

3. Specialized fork with low position crown

 

„

1.5” bearing only (part # S092500001)

NOTE: 

Specialized forks with high crown are not compatible with frames with low position 

bearing

Low bearing head tube

1 1/8” - 1.5” (standard)

1.5” Bearing (52x40x7)

Part #: S092500001

1.5” Bearing (52x40x7)

Part #: S092500001

1.5” Crown Race

Part #: S092500005

1.5” to 1 1/8” Adapter

Part #: 2001-9010

1 1/8” Campy Bearing

1 1/8” Crown Race

1 1/8” Steerer Tube

1 1/8” to 1.5” Specialized

carbon steerer tube with

built-in crown race

(Low bearing position)

1 1/8” to 1.5” Standard

Steerer Tube

1

2

3

Summary of Contents for Safire





















Reviews: