FSR Flex-IO16, Installation And Operating Manual

Page: 9 / 42

9
If you are trying to connect the Flex-IO via IP first, you will need enough understanding
and system privileges on the PC to change the PC’s “Local Area Connection” settings to
allow the PC to communicate with Flex-IO’s factory default IP settings (shown below):
IP address: 192.168.5.80
Subnet mask: 255.255.255.0
Gateway:
192.168.5.48
4) Verify the Firmware version and possible Upgrade of Firmware
5) Program, Download, and Test the various Actions required for the various Flex-IO
Channels.
Sample commands are shown below:
GPI 1 LOW
GPO 1 ON
WAIT 1000
SER ‘passed serial string <0D>’
IP 200.30.4.5:345 "ACTION = VPRESS DESKTOP 1 BUTTON 1<0D>"
IP 200.30.4.5:345 "<01 57 7F 03 4D 55 54 30 08 20 09 21 0A 20 10 21 1F 2C 02>"