-
6-
3.
System Operations
3.1 Turning On/Off System
To turn on the system, firmly press
MSW
(Main Control Switch) for a light click.
SYSTEM INDICATOR
and
GAUGE INDICATOR
should light up after about 10 seconds delay. This delay is normal and should not be
alarmed.
To turn off the system, press
MSW
again. All indicating lights will be off. Slight delay in
AC OUT INDICATOR
is normal when
AC OUT
is not or lightly loaded. Pressing
MSW
will toggle the system status.
3.2 Charging System
3.2.1 AC Charging
To perform system charging via AC power source, the following steps are to be followed.
Step 1: Turn on the system by pressing
MSW.
Step 2: Connect power cord (IEC320 type) to
AC INLET
, as illustrated in Figure 2.
Figure 2. AC charging
When EMERGY 3000 is charging,
CHARGING INDICATOR
will light up
CHARGING INDICATOR
will turn off
automatically when charging is terminated. The charging time for EMERGY 3000
is around 4-5 hours for a
full charge cycle (from empty to full).
The input source should comply with the input range (100-120Vac or 220-240Vac)
as indicated on
AC INLET
.
3.2.2 PV Charging
