-
8-
3.3 System Outputs
3.3.1 AC Output
AC outlet(s) of EMERGY 3000 provided is (are) also compatible with local electrical plugs. To utilize AC
output, the following steps are to be followed.
Step 1: Turn on the system by pressing
MSW.
Step 2: Turn on AC output(s) by pressing
AC OUT SW
.
AC OUT INDICATOR
will turn on.
Step 3: Connect power cord of apparatus, equipment or appliance to
AC OUT
(AC outlet).
To discontinue using AC output, simply remove power cord of load unit from
AC OUT
or turn off AC output
by pressing
AC OUT SW
again.
AC OUT INDICATOR
will turn off.
The voltage and frequency range of the apparatus, equipment or appliance should
comply with the output voltage and frequency range of EMERGY 3000
to avoid
under-performance or damage to the load unit.
3.3.2 DC (USB) Output
DC (USB) output is turned on when
MSW
and
DC OUT SW
are switched on. When
DC OUT SW
is turned off,
DC output is also turned off. A total of 2A current is available for the two USB outlets.
3.4 Physical Positioning
EMERGY 3000
is designed to operate in an upright position as illustrated in Figure 4 Stable footing should
be provided when using the system. It is also highly recommended that the two braking mechanisms be
engaged to avoid possible skidding especially when the ground is inclined.
Figure 4. Physical Operating Position
Operations under other positions will add to thermal stresses on the system and
reduce system operating time.
