25
9/2021
On Screen Display (OSD) IPS500A
Submenus under the ADJUST menu
(variable by signal type)
1. BRIGHTNESS Increases or decreases the brightness. (Range : 0~100)
2. CONTRAST Increases or decreases the contrast. (Range : 0~100)
3. SHARPNESS Sets the sharpness of image. (Range : 0~100)
4. SATURATION Changes the tone of color. (Range : 0~100)
5. COLOR Changes the richness of color. (Range : green 0~50, red 0~50)
6. CLOCK Increases or decreases the sampling frequency. (Range : 0~100)
7. PHASE Increases or decreases the phase level. (Range : 0~100)
8. AUTO ADJUST fi ts to the most appropriate screen on the D-SUB Analog / RGBs signal.
Submenus under the IMAGE menu
(variable by signal type)
1. IMAGE SIZE Changes the image size. (FILL ASPECT, 1:1,FILL H, FILL V, FILL ALL)
2. H POSITION Adjusts the horizontal position of the displayed source image.(Range : 0~100)
3. V POSITION Adjusts the vertical position of the displayed source image. (Range : 0~100)
4. FILTER Sets the sharpness of image. (Softest, Soft, Normal, Sharp, Sharpest)
5. OVER SCAN Adjusts the displayed size. (0~8)
Submenus under the SETUP menu
1. LANGUAGE Changes the OSD language. (8 languages)
2. OSD POSITION Changes the OSD position. (9 Positions)
3. RESET SETTINGS Changes all the OSD values to factory default.
4. AUTO SOURCE SELECT Disables or enables auto source select. (ON: Searches through all possible input
sources until an active video source is found. OFF: Video input is manually selected.)
5. INACTIVE INPUT Changes the input source between RGBs and YPbPr.
6. BLANK PATTERN Enables or disables a blank pattern if no signal.
7. NO SIGNAL OSD Adjusts time until the OSD menu will disappear after DPMS by adjusting the menu.
(Never, 10, 30, 60, 300 seconds). BLANK PATTERN must be disabled.
Submenus under the PIP menu
1. LAYOUT Changes the layout. (OFF, PIP, PBP1. PBP2)
2. SOURCE Changes the secondary source.
3. SIZE Changes the PIP size. (Small, Large)
4. POSITION Changes the PIP position.
5. SWAP Swaps the position of the Primary and Secondary images.
