FSN FS-L3202D, User Manual, Page: 36 / 40

FSN1986 - 11/2017
36 - English
Cleaning Instructions
Precautions
Before cleaning, switch the display in stand-by position to prevent the control touch panel from
being activated inadvertently by sweeping over the front filter. In stand-by position the touch
panel cannot be activated by just sweeping over them. To switch the display on again, you must
press the stand-by key again.
Take care not to damage or scratch the front filter or LCD panel.
t #FDBSFGVMXJUISJOHTPSPUIFSKFXFMSZUIBUDBOUPVDIUIFGSPOUöMUFS
t %POPUBQQMZQSFTTVSFPOUIFGSPOUöMUFSPS-$%QBOFM
t %POPUVTFDMPUINBEFGSPNTZOUIFUJDNBUFSJBM QPMZFTUFSBTUIJTNBZDBVTFFMFDUSPTUBUJDEJT
-
coloration within the LCD.
t %POPUBQQMZPSTQSBZMJRVJEEJSFDUMZUPUIFGSPOUöMUFSQBOFMPSDBCJOFUBTFYDFTTMJRVJENBZ
cause damage to internal electronics. Instead, apply the liquid to the cleaning cloth.
t 'PMMPXZPVSIPTQJUBMQSPUPDPMGPSUIFIBOEMJOHPGCMPPEBOECPEZøVJET
t 5IFEJTQMBZJTOPUEJTJOGFDUFEPSQBDLFEJOTUFSJMFFOWJSPONFOU
t 'PMMPXZPVSIPTQJUBMQSPUPDPMJODBTFUIFEJTQMBZOFFETUPCFEJTJOGFDUFEQSJPSUPJOTUBMMBUJPO
Front Filter
Proceed as follows:
1. Remove dust with a dry, lint-free, non-abrasive soft cotton cloth.
2. Remove fingerprints or grease using a lint-free, non-abrasive soft cotton cloth that is lightly
moistened with plain water or a mild commercial glass cleaning product suited for coated
glass surfaces.
3. Gently wipe dry with a dry cotton cloth.
The following products are tested and approved:
t .JTUZ$MFBS-FNPO%JTJOGFDUBOU
t #PIMFHMBTTDMFBOFS
t ;FQ)FBWZEVUZHMBTTBMMTVSGBDFDMFBOFS
t ,MFBS4DSFFO
t 4DSFFO5'5 ,POUBLU$IFNJF
t *ODJEJO'PBN &DPMBC
t .JDSP[JE
t .JMEEFUFSHFOU
t *TPQSPQZMBMDPIPMXJUIDPODFOUSBUJPO
t )PVTFIPMECMFBDI HFOFSJDTPEJVNIZQPDIMPSJUFTPMVUJPOTPGTPEJVNIZQPDIMPSJUF
diluted with water between 1:10 and 1:100)