26
On Screen Display (OSD) Menus
FM-A5503DC
Submenus under the COLOR menu
1. GAMMA Select the appropriate gamma. (BYPASS,1.8, 2.0, 2.2, 2.4, 2.6, DICOM).
2. COLOR SPACE Select the color space setting. (NATIVE, sRGB, BT.2020, or AUTO)
3. COLOR MODE Changes the image color setting. (C1, C2, C3, USER)
4. RED Red balance. (Only works with USER mode) (Range : 0~255)
5. GREEN Green balance. (Only works with USER mode) (Range : 0~255)
6. BLUE Blue balance. (Only works with USER mode) (Range : 0~255)
Submenus under the ADVANCED menu
1. ASPECT RATIO Changes aspect ratio of the displayed image. (Full, Auto, FILL H, 4:3, 5:4, 16:9, 1:1)
2. OVER SCAN Adjusts the displayed size. (0~10)
3. IMAGE PRESET Changes image settings. (User preset 1~5)
4. FREEZE Keeps the image still.
5. ROTATE/MIRROR Changes the displayed image direction. (Normal, 90, 180, 270, H-Mirror, V-Mirror)
6. SMART INPUT Enables automatic switch to the backup source when main source is off .
7. SMART MAIN When smart input is on, current source is changed to main source.
8. SMART 2ND When smart input is on, backup source is set to 2nd source.
9. FREESYNC Enables FreeSync operation.
Submenus under the SETUP menu
1. LANGUAGE Changes the OSD language. (10 languages)
2. OSD OVERLAY Adjusts the OSD transparency.
3. OSD POSITION Changes the OSD position. (9 Positions)
4. OSD MENU TIME Adjusts the length of time the OSD Menu is present on the screen. (range: 10~60
seconds)
5. OSD LOCK Sets the OSD lock. To unlock, press the PLUS and UP buttons.
6. BACKLIGHT Increases or decreases the backlight. (Range : 0~100)
7. PANEL SAFE MODE Controls when the PANEL SAFE operation is run. Please see the CAUTION notice
below.
8. RESET Changes all the OSD values to factory default.
CAUTION
PANEL SAFE is an operation that is launched when the monitor’s soft power is turned off .
It is recommended that the PANEL SAFE operation runs periodically. Video should be displayed on screen
for 18 hours or less per day to reduce image sticking and to maintain the reliability of FM-A5503DC. PANEL
SAFE mode (ON/OFF) - OSD setting:
ON mode: PANEL SAFE mode starts after 10 minutes when monitor’s soft power is turned off using the
touch button or remote button. When soft power LED starts blinking, this indicates the PANEL SAFE
operation has been launched.
OFF mode: PANEL SAFE operation automatically runs every 4 hours after the monitor is turned off with
the touch button or remote button (soft power).
Note: During PANEL SAFE operation user can stop the process any time by pressing and holding the soft
power button for few seconds.
