M02-CLK4
Page 2 of 12
1) Scoreboard connections:
The scoreboard should be supplied with a 230V mains supply.
The mains supply should be fed through a 5 amp circuit breaker
and it is highly recommended that the supply should be fed through
a Residual Current Device (RCD)
If the scoreboard has been supplied with a separate aerial this
should be mounted as high as possible
2) On Power Up:
'Cd - ' will be displayed for 5 seconds
o
This is a "code" number stored in memory
o
There are 5 possible codes that may be used, this
allows a number of displays to be operated in close
proximity of each other
o
Further details on programming the code can be
found at the end of the manual
The scoreboard will now go into normal operation, displaying
scores with the clock blanked.
