background image

© 2022 Flanders Scientific, Inc.

11

Return to Table of Contents

Menu - Scope Menu

Scope Menu

Function

Luminance

Off

Scope

Lum Position

Bottom Right

Video

Lum Style

IRE

Color

Vector

Off

System

Vec Position

Bottom Right

OSD

Lum Coloring

Off

Lum & Vec Position

Use Lum & Vec Position to select in what area of the screen you would like your Scopes to be displayed.

Lum Style

Select IRE or HDR (PQ) Waveform. Note: HDR Waveform currently only works with YCbCr formats.

Lum Coloring (Customizable Exposure Check)

Generates an artificial luminance map of the incoming source that can be particularly useful in identifying 

overexposed areas in any given shot. An onscreen scale helps indicate what artificial color corresponds 

to what luminance from 0 to 100 percent.

You can change the range of these color coded regions to any preferred setting by using the monitor’s 

rotary knobs. The H POS rotary knob will adjust the lower limit of the lower color coded region. The V 

POS rotary knob will adjust the upper limit of the lower color coded region. The Ref POS rotary knob 

will adjust the lower limit of the upper color coded region. The F Stop Rotary knob will adjust the upper 

limit of the upper color coded region. These color coded ranges are retained in memory so you can exit 

and reenter Lum Coloring Mode without having to reset your desired threshold levels.

Note: Scopes only work in Normal LUT Mode. Scopes will not operate in Advanced LUT Mode.

Summary of Contents for XM551U

























Reviews: