FSI Calibration Guide
Using CR100 / ColourSpace / BoxIO
© 2022 Flanders Scientific, Inc.
7
Starting with firmware version 2.0.0-2282 it is necessary to limit luminance on the 3D LUT in Colour-
Space to set the desired peak luminance on the DM250. This is only necessary with the DM250 OLED
and does not apply to any other models. The calibration process remains largely the same as the
standard 3D LUT procedure, with one important additional step:
The rest of the calibration procedure then continues per the standard 3D LUT calibration instructions.
Appendix 2: Calibration of DM250
(running Firmware 2.0.0-2282 or later)
1. When creating the 3D LUT you will want to set the Max Luminance to 100 by selecting the
checkbox next to max and manually entering 100
