1. Shut off water inlet tap valve. Remove old filters. We recommend you use a product called HydraSil Water
Sanitizer. It is a food grade water sanitizer. Follow the sanitizer instructions and place liquid into each of the
empty filter housings. Reassemble the filter housings without filters.
2. Turn water supply back on to about 30% of maximum flow rate.
3. Shut off water supply. Let entire system sit for about 2 hours to thoroughly sanitize.
4. Shut off the incoming tap valve.
5. Open faucet to release pressure. Turn on inlet water at ball valve. Flush the system for 10 – 15 minutes.
PERFORMANCE SHEET – Relating to Carbon
Production rate 1.5 Lpm for best results.
Contaminant
Organic
Chlorine Over 95%
Herbicides Over 95%
Pesticides Over 95%
DDT Over 95%
Endrin Over 95%
Lindane Over 95%
Aldrin Over 95%
Benzene Over 95%
VOCs Over 95%
Adrazin Over 95%
Fluorathene Over 95%
Phenol Over 95%
Trihalomethanes Over 95%
Toxaphene Over 95%
Dichloromethane Over 95%
Chloroform Over 95%
Trichlorethylene Over 95%
Perchlorethylene Over 95%
Tannic Acids Over 95%
Cryptosporidium Over 99%
950PL Only
Giardia Cysts Over 99%
Lead To 2000 Gallons
CAUTION: Do not use with water that is microbiologically unsafe or with water of unknown quality without
adequate disinfection before or after the system. Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts.
