Reset WPS
WAN
1
2
IPTV/3
POWER
Step 2
: Connect the WAN port of the router.
1. Power on your original and new routers.
2. Connect the WAN port of the original router to a LAN port of the new router using an Ethernet
cable. After the LED indicator of the new router blinks fast for 8 seconds, the PPPoE user name and
password are imported to your new router.
3. Remove the original router.
1. Ensure that the router is powered on.
2. Connect the router’s WAN port to the LAN port of your modem or the Ethernet jack using an
Ethernet cable. The LED indicator blinks fast for 3 seconds.
Power source
TIPS:
This function is only applicable when the connection type of the original router is
PPPoE, except for PPPoE of some special ISPs or PPPoE connection set up manually with
VLAN information.
WAN
Internet
Or
Ethernet cable
5
EN
