LED Indicators
Reset WPS
WAN
1
2
IPTV/3
POWER
LED Indicator
Solid on
Blink slow
Blink fast for
3 seconds
Blink fast for
2 minutes
Off
The system is starting up, or the router is already
connected to the internet.
The router fails to connect to the internet.
A device is connect to or disconnected from an
Ethernet port of the router.
The router is pending for or performing WPS
negotiation.
The system is faulty, or the router is not powered on
properly.
LED Indicator
Description
Status
Reset
Used to restore the factory settings of the router.
Method
: When the router is working normally, hold the button down
with a needle-like object for about 8 seconds, and then release it when
the LED indicator blinks fast. The router is reset.
Used to start the WPS negotiation of the router.
Method
: Press the button, and the LED indicator blinks fast. Within 2
minutes, enable the WPS function of the other WPS-supported device
to establish a WPS connection.
Power jack.
Please use the included power adapter to connect this jack to a power
supply.
WPS
POWER
Button/Jack Description
3
EN
