Console
M2EFAN I-F
Console
M2EFAN I-F
Replacing the Fan Module
1. Loosen the captive screws of the fan module with a screwdriver.
2. Hold the handle at the end of the fan module, and withdraw the fan module slowly.
NOTE:
1. If the screws cannot be tightened, it is probably because the fan module is not
fully inserted. Please check it carefully.
2. The fan modules are factory-installed, please take steps above to replace the modules if
necessary.
3. Hold the handle at the end of a new fan module. Insert the fan module to the chassis slowly until it
is fully seated, and make sure that it is in good contact with the slot.
4. Tighten the captive screws with a screwdriver to fix the fan module in the switch chassis.
