Step 4.
Attach LEG FRAMES (A) to TOP PANEL (C) using 28MM SCREWS (1)
as shown.
B Wire Shelf - 1 PC
D Plastic Washer - 4 PCS
2 30mm Bolt - 4 PCS
5
Step 3.
Repeat STEP 1. Attach WIRE SHELF (B) to each LEG FRAME (A) using 30MM
BOLTS (2) and PLASTIC WASHERS (D) as shown.
B
D
2
2
2
2
D
D
D
C Top Panel - 1 PC
1 28mm Screw - 4 PCS
7
8
Step 6.
Unfold NON-WOVEN BIN (G) and put the BOTTOM BIN SUPPORT (H) into
NON-WOVEN BIN (G) as shown.
Step 7.
Repeat Step 6 to assemble the two remaining NON-WOVEN BINS (G) and
place them onto the shelves as shown.
This unit is intended for use only with
the products and maximum weights
indicated. Use with other products or
products heavier than the maximum
weights indic ated may result in
instability causing possible injury.
Furniture can tip over or break if
improperly moved.
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your 3-DRAWER
CART please e-mail our Customer Service Department at:
[email protected] or call us at 1-800-639-3803
FINISHED
To clean the 3-drawer cart, wipe with soft,
dry cloth. Apply a small amount of cleaning
solution to the cloth if required. Do not use
abrasive cleaners in order to prevent
scratching the surfaces.
H Bottom Bin Support - 3 PCS
G Non-Woven Bin - 3 PCS
G
G
H
G
G
G
G
10 lbs.
15 l
bs
.
15 l
bs
.
15 l
bs
.
C
1
1
6
Step 5.
Attach CASTERS (F) and LOCKING CASTERS (E) to each LEG FRAME (A)
using WRENCH (4) as shown.
A Leg Frame - 2 PCS
E Locking Caster - 2 PC
F Caster - 2 PCS
4 Wrench - 1 PC
4
F
E
E
F
A
A
