EN
6
Fix Reinforced Core and Fiber Cable
1. Demount port plugs, pressboard and fixing nut of reinforced core.
2. Tighten fiber cable pressboard. If the diameter of fiber cable is not long enough, then enlarge it
with insulation tape.
3. Tighten nut of reinforced core with the special wrench (plastic) and then re-tighten it with the
metal wrench.(the metal wrench should be provided by operator).
Fiber cable
Housing
Fixing device for
fiber cable
Fixing device for reinforced core
Pressboard
Nut for reinforcesd
core
Fixing bolt for fiber cable
Fiber
NOTE:
Make sure to check whether the fiber cable stripped fits in with the fixing ports
affect or not. If not, the adjustment should be done in time. Otherwise it will affect
installation quality.
Seal fitting
