Configuring the AP via the Console Port (FAT AP Mode)
Step 1: Connect a computer to the AP’s console port using the console cable.
Step 2: Start the terminal simulation software such as “HyperTerminal” on the computer.
Step 3: Set the parameters of the “HyperTerminal”: 9600 bits per second, 8 data bits, no parity, 1 stop bit
and no flow control.
Step 4: Click “Login” to display the web-based configuration page.
Step 5: Click “System Mode Switch” to switch the FIT/FAP working mode.
13
System Mode
NOTE: The device restarts after mode switch. Plese wait for a minute.
Current Mode: Fit AP Mode
AC
AP
AP
ROUTER
AP
POSE SW
Fit AP Mode
Fit AP Mode
POSE SW
CLLENT
CLLENT
Internet
Internet
NOTE:
The AP works in Fit AP Mode by default.
EN
