FS 1000Base-T, Quick Start Manual

Page: 7 / 43

- 6 -
EN
2.3 Wiring the Power Inputs
The terminal block connector on the top panel of IMC-1F1T is used for 12~48V
DC power inputs. Please follow the steps below to insert the power wire.
Step 2: Tighten the wire-clamp screws to prevent the wires from loosening.
When performing any of the procedures like inserting the wires or tightening
the wire-clamp screws, make sure the power is OFF to prevent from getting
an electric shock.
!
V1+
PWR1
Max. fault loading: 24V, 1A
DC Input: 12-48V, 3A max.
AC Input: 24V, 1.5A max.
PWR2 Fault
V1- V2+ V2-
1 2 3 4 5 6
1
Power 1
+
_
2 3
Fault
4 5
Power 2
+
_
6
Step 1: Insert positive and negative DC power wires into contacts 1 and 2 for
POWER 1, or 5 and 6 for POWER 2.