1-5
1.4 F3000 Vat Setup cont.
Left Display
Right Display
Action
DST START MONTH
3
Enter the daylight savings time starting month using the 1-10 keys. (Default is
US government starting month “3”.) Press
.
DST START SUNDAY
2
Enter the daylight savings time starting Sunday using the 1-10 keys. (Default is
US government starting Sunday “2”.) Press
.
DST END MONTH
11
Enter the daylight savings time ending month using the 1-10 keys. (Default is
US government ending month “11”.) Press
.
DST END SUNDAY
1
Enter the daylight savings time ending Sunday using the 1-10 keys. (Default is
US government ending Sunday “1”.) Press
.
EXIT Exit
Press
button once and press
to scroll to System, Time/Date, Filter, E-Log
or Change Password. With desired choice displayed, press
or press the
Exit/Scan button three times to return the controller to OFF.
filter
Press
.
Global filter count
20
Press
. (Changes the total number of cooks that occur before a filter prompt.
The default is 20.)
Eod filter time
21:00
Use numbered buttons to change end of day filter alert time. Press
. After
this time, the controller prompts for filter when user presses the power button
to go to the OFF state.
1 polish timer
EnableD
Press
to scroll to choice and press
.
(This enables or disables the polish
timer.)
1 polish time
08:00
Use numbered buttons to change time (use 10 for 0). (This is the time the first
polish prompt will occur each day. The default is 8:00 AM.) Press
.
1 polish duration
30
Use numbered buttons to change (use 10 for 0). (This is the duration, in
minutes for a polish. The default is 30 minutes.) Press
.
1 polish delay time
00:00
Use numbered buttons to change time (use 10 for 0). (This is the amount of
time that an operator can delay the start of a polish.) Press
. After the delay
the operator must polish.
1 polish start tempr
300F
Use numbered buttons to change temperature (use 10 for 0). (This is the
temperature required for a polish to begin.) Press
.
2 polish timer
enabled
Press
to scroll to choice and press
.
(This enables or disables the
second polish timer.)
2 polish time
14:00
Use numbered buttons to change time (use 10 for 0). (This is the time the
second polish prompt will occur each day.) Press
.
2 polish duration
30
Use numbered buttons to change (use 10 for 0). (This is the duration, in
minutes for a polish. The default is 30 minutes.) Press
.
2 polish delay time
01:00
Use numbered buttons to change time (use 10 for 0). (This is the amount of
time that an operator can delay the start of the second polish. The default is one
hour.) Press
. After the delay the operator must polish.
2 polish start tempr
300F
Use numbered buttons to change temperature (use 10 for 0). (This is the
required temperature for the second polish to begin.) Press
.
Exit Exit
Press
button once and press
to scroll to System, Time/Date, Filter, E-
Log, Change Password or Edit Alarm Names. With desired choice displayed,
press
or press the Scan button once to return the controller to OFF.
E-Log
Press
. (This is a log of the ten most recent error codes.)
NOW Time/date
Press
. (Current time and date)
A E#
Time/date
Errors listed A-J. Press
to scroll through errors. If no errors exist, pressing
will display No Errors.
Exit Exit
Press
button once and press
to scroll to System, Time/Date, Filter, E-
Log, Change Password or Edit Alarm Names. With desired choice displayed,
press
or press the Scan button once to return the controller to OFF.
Continued on the following page
Summary of Contents for YUM F3000
Page 35: ......
