Frymaster YUM F3000, Operation Manual

Page: 19 / 36

1-1
CHAPTER 1: F3000 CONTROLLER INSTRUCTIONS
1.1 Using the F3000
ON/OFF

ON - Press ON/OFF button fryer heats to setpoint or idle temperature and displays: COOL or DROP.

OFF- Press and hold ON/OFF button. Controller displays OFF.
Cooking

Fryer displays COOL or DROP

COOL display: Press product button; fryer heats to setpoint and displays DROP.

DROP display: Press product button and drop product.

DONE display: Press product button to cancel alarm.

CANCEL: Press and hold product button to cancel a cook cycle.
Responding to Polish Prompt

Computer displays Polish Now, alternating with Yes No.

Press Yes (button under Yes display) and the polish cycle launches.

Computer displays Cool after polish cycle.
Computer Button Navigation

Product: Active when adjacent LED is lit. Press to launch cook cycle. Press and hold to cancel a launched cook
cycle. Press at end of cook cycle to halt alarm and end cook.

Scan: Press once, all product buttons are lit; Select Product displayed. Press product button to view product
name. Press Scan again to repeat. Press Scan twice to return to normal operation.

Left/Right Arrows: Navigate options in left display.

Up/Down Arrows: Navigate options in right display. Press the up/down arrow simultaneously to change to a
second language if one is selected in setup.

Exit Cool: Exits cool mode and sets fryer’s temperature to setpoint.

Thermometer: Fryer ON: Press and release for setpoint/left; vat temp/right.

Thermometer: Fryer OFF: Press to display temperature, time, date, system version, F3000 version and circuit
board versions.

Checkmark: Fryer OFF: Press and hold 3 seconds: Scroll filter usage; Press and hold 10 seconds: Product
setup.

Checkmark: Fryer ON: Check recovery and respond to prompts.

Filter: Press and release: Cooks remaining to filter cycle. Press and hold: Filter options: Filter, Clean,
Dispose, Drain to Pan and Fill Vat from Pan.