YFPRE18E ELECTRIC FRYER
CHAPTER 4: BUILT-IN FILTRATION
4-3
4.2.1 Assembling the Filter (cont.)
Assemble the filter as follows:
1.
Place the support grid in the bottom of filter
pan.
2.
Center the hold-down ring on a clean sheet of
filter paper, ensuring is overlaps all edges of
the ring.
3.
Position the hold-down ring and paper on top
of the filter pan, sliding it into position
toward the pickup tube. Ensure the hold-
down ring seals around the support grid,
which prevents air from entering the system.
Support grid properly placed in filter pan.
Ensure the filter paper extends
past the edge of the hold-down
ring.
Hold-down ring shown with ample extension of
filter paper.
Summary of Contents for YFPRE18E
Page 15: ...3 4...
