Y/KSCF/C/HC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS
CHAPTER 7: TROUBLESHOOTING
7-6
Fryer Troubleshooting (cont.)
7.2.6
Main burner malfunctions.
A.
Main burner will not ignite; no gas is
present at main burner.
1.
Check that float switch is not stuck
in the "down" position.
2.
Check and reset the high-limit
switch.
3.
The combination gas valve and/or
electronic ignition system may be
defective; Contact a FAS for
service.
B.
Main burner flames are small and
appear lazy; shortening does not come
up to temperature quickly. Contact a
FAS for service.
C.
Fryer will not reach setpoint
temperature and/or runs erratically.
1.
Incorrect location or adjustment of
sensor probe. Contact a FAS for
service.
2.
Defective temperature sensor. Contact
a FAS for service.
D.
Fryer shortening temperature cannot be
controlled; fryer runs at high-limit
temperature. Possible causes are:
1.
Defective operating thermostat.
Contact a FAS for service.
2.
Defective temperature probe.
Contact a FAS for service.
