Frymaster MSDU Operators & Service Manual Download Page 4

manuals, and to stock a minimum amount of parts for Frymaster equipment.  A list of Factory 
Authorized Service Centers (FASCs) was included with this equipment when shipped from the 
factory.  

Unless specifically indicated otherwise in this manual, failure to use qualified service 

personnel will void the Frymaster Warranty on this equipment. 

 
1.4  Shipping Damage Claim Procedure 

 
This equipment was carefully inspected and packed before leaving the factory.  The transportation 
company assumes full responsibility for safe delivery upon acceptance of the equipment for 
transport. 
 

1.5  What To Do If Your Equipment Arrives Damaged

 

 

1.

 

File a claim for damages immediately

, regardless of the extent of damages. 

 
2.

 

Inspect for and record all visible loss or damage

 and ensure that this information is noted on 

the freight bill or express receipt and is signed by the person making the delivery. 

 

3.

 

Concealed loss or damage

 that was unnoticed until the equipment was unpacked should be 

recorded and reported to the freight company or carrier 

immediately 

upon discovery. A 

concealed damage claim must be submitted within 15 days of the date of delivery.  Ensure that 
the shipping container is retained for inspection. 

 

DOES NOT ASSUME RESPONSIBILITY 

 FOR DAMAGE OR LOSS INCURRED IN TRANSIT.

 

 

1.6 Warranty 

Statement 

 

WARRANTY PROVISIONS 

 
1.

 

Frymaster L.L.C. warrants all components of the MSDU against defects in material and 
workmanship for a period of one year (parts only). 

 
2.

 

This warranty is void if equipment is found by Frymaster L.L.C. to have been subjected to 
alteration, misuse, or abuse. 

 

PARTS RETURN 

 
All defective in-warranty parts must be returned to a Frymaster Factory Authorized Service Center 
(FASC) within 60 days for credit.  After 60 days, no credit will be allowed 
 

2. 

ASSEMBLY AND OPERATION 

 
2.1 Equipment 

Description 

 

The Vegetable Oil Disposal Unit (MSDU) is designed for the safe transportation of used cooking oil 
from the kitchen to a disposal container.  The MSDU holds to 50 pounds/23 kg of cooking oil.  The 
unit consists of a tank to receive waste oil from a fryer and a heavy-duty manual pump for 

Summary of Contents for MSDU













Reviews: