background image

 

ii

 

 
 

NOTICE 

IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS 
ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART 
PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED 
SERVICE CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS 
ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID.  FURTHER, 
FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, 
DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE 
DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION 
OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED 
SERVICE CENTER.

 

 

NOTICE  

Drawings and photos used in this manual are intended to illustrate operational, 
cleaning and technical procedures and may not conform to on-site management 
operational procedures.

 

 

 

WARNING 

Improper installation, adjustment, alteration, service or maintenance can cause 
property damage, injury or death.  Read the installation, operating and maintenance 
instructions thoroughly before installing, operating or servicing this equipment. 

 

 

DANGER 

Hot vegetable oil will cause severe burns.  Allow vegetable oil to cool to 100°F 
(38°C) before transporting to the disposal site.  Use extreme caution when 
transporting and disposing of spent vegetable oil. 

 

 DANGER 

Before each use inspect the cover to ensure the cover gasket is present and 
properly placed. DO NOT use the disposal unit if this gasket is damaged or 
missing. 

 

 

 

 

Summary of Contents for MSDU













Reviews: