1-1
FILTERQUICK
™
FQE30 SERIES ELECTRIC FRYERS
CHAPTER 1: SERVICE PROCEDURES
1.1 General
Before performing any maintenance on your Frymaster fryer, disconnect the fryer from the electrical
power supply.
WARNING
To ensure the safe and efficient operation of the fryer, the electrical plug(s) must be
fully engaged and locked in their pin and sleeve socket.
When electrical wires are disconnected, it is recommended that they be marked in such a way as to
facilitate re-assembly.
1.1.1 Reading Model Numbers
1.2 Replacing the Controller or the Controller Wiring Harnesses
1.
Disconnect the fryer from the electrical power supply.
2.
Unscrew the filter push pull handle knobs.
3.
Open the control panel by removing the screws on the bottom of the bezel. Carefully lower the
bezel.
4.
Remove the two screws from the upper corners of the controller. The controller is hinged at the
bottom and will swing open from the top.
