6
4.
Close and secure the lid.
5.
Check the circuit breaker on the rear of the machine. It may need to be reset by pushing
the button.
Warning
: Never attempt to remove a jam while the machine is running.
Blade Maintenance
Warning
: Chipper blades must be checked regularly, and replaced at the first sign of
damage or excess wear.
1.
Remove the knife block from the machine by loosening the 2 thumbscrews.
Warning
: The blades are very sharp, take extra care when handling the knife block.
2.
Remove the large main blade by unscrewing the 2 small slotted screws. Replace if
necessary.
3.
Using a 5mm (3/16”) hex key, remove the 2 long bolts holding the plastic spacers and
small blades.
4.
The length of blades can now be easily removed. Replace as necessary.
5.
Replacement blades are readily available from Hopkins PEI. Complete knife block
assemblies are also available.
Maintenance
There is no user maintenance required, however the machine should be regularly inspected
for damage to the electrical supply cable, knife blades, and the safety interlocks should be
periodically tested.
