Registration / Guarantee entitlement
With Isopin, you can register your appliance under its article number so as to be able to make use of customer
services and guarantees and get in touch with the manufacturer directly. You will find the Isopin, a 12-digit regis-
tration number, on the bottom of the Base motor unit (e.g. #FRXSH 159 753 258 654).
It is not necessary to submit proof of purchase if you have registered your appliance via www.frxsh.com/isopin.
This is irrespective of whether you have bought the appliance yourself or have received it as a gift.
The Swiss operators of Isopin will not give your name or any further details to either FRXSH AG or third parties.
Your privacy is thus guaranteed.
.
Environmental protection
Your appliance contains valuable raw materials that can be reused. Do not dispose of your FRXSH
®
in your normal
domestic waste at the end of its service life. Thanks to its registration via Isopin, the manufacturers of the indi-
vidual components can be determined and the parts sent for the correct form of recycling.
Troubleshooting
Problem
Cause
Remedy
The mixing process will not
start.
The mixer lid (Dancer) is
not screwed firmly on to
the bottle.
Screw the mixer lid firmly onto the bottle until the grey
middle section is flush with the white edge surface.
The bottle is not of the type
approved by FRXSH
®
.
The FRXSH
®
Dancer may only be used with bottles supplied
by FRXSH
®
or with beverage bottles or babies’ bottles that
have a standard 63-mm-wide-mouth-thread.
The drive section is clogged
up or dirty.
Clean the drive section and place the closed bottle on the
motor unit (Base) again.
No power supply.
Check that the mains plug is correctly connected and
repeat the process.
The appliance has briefly
overheated.
Leave the FRXSH
®
to stand for a few minutes until the
appliance has cooled down. It is perfectly safe to leave it
plugged in.
3290_1201_005_FrXsh_Bedienungsanleitung_176x176_E.indd 7
29.11.12 14:32
