INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
ALBORAN BM
SOLID LINES
Versión: -1
-10-
1.3.
OPERATING CONDITIONS
Exhibitor's performance will depend on the conditions of the environment in which
it is installed, the amount and distribution of food exposed and the number of
openings of the rear doors.
1.4.
RECEIPT OF CABINET
Check the unit carefully to make sure that it is not damaged and no part or
accessory is missing. For information about missing parts or accessories please
contact the Frost-Trol Commercial Department or our official representative for
your country.
This dry heat display cabinet has been thoroughly inspected to ensure the highest
level of quality. Any order for components should be made to Frost-Trol or our
official representative for your country within 48 hours of receipt of the cabinet.
1.5.
DAMAGE SUSTAINED IN TRANSIT
If the cabinet has sustained any damage in transit, then you must make a claim
with the Shipping Company immediately, by stating the damage on the delivery
note and having this signed by the carrier.
1.6.
TECHNICAL ASSISTANCE
Should you have any technical queries concerning the installation of the display
cabinet, please contact our Technical Department.
If you need to get in contact with Frost-Trol with regard to a specific element,
please make sure that you are able to quote the model and serial number. This
information can be found on the nameplate, which is located inside the display
cabinet.
1.7.
STORAGE
Do not storage the cabinet outdoors; do not expose to climatic conditions or to
direct sunlight.
The cabinet with plastic cover may reach temperatures above 80° C in the sun,
which might result in the deformation of plastic parts.
Check the good condition of the packaging before storing the cabinet.
Summary of Contents for ALBORAN BM
Page 3: ......
