23
C. Install raceway
You can neatly conceal all cables running between the receiver
and the ceiling space using widely-available plastic raceway.
Cut enough raceway to extend from just behind your mounted
receiver to the ceiling.
Using a level or tape measure to ensure straightness, attach the
raceway to the wall.
Route all speaker and sensor cables in raceway and close.
D. Support cables
Ensure cables are installed in adherance to local and national electric codes. Speaker and sensor cables
should not rest on the ceiling. Lift them off the ceiling and use cable/zip ties to secure them loosely to
beams, anchor bolts, or other support structures in the ceiling (do not attach them to ductwork, plumbing,
or other secondary work).
2. WALL ROUTING
If you’re routing cables along walls, follow these guidelines:
A. Tack cable
Starting from your speaker, begin securing speaker cable to the wall with professional cable tacks. For a neat
installation, try to keep the cable as close to the ceiling as possible.
Make your way back toward the receiver.
Repeat for the other speakers and sensors in the room.
ceiling sensor
wall sensor
ceiling speaker
or
3. CONNECT CABLES TO RECEIVER
To ensure faithful reproduction of stereo auxiliary inputs, be sure to properly match the red (+)/black (-) and
left/right speaker wires to the proper receiver terminals.
Connect all speaker and sensor cables as shown:
IR speaker*
sensor cable
speaker cable
*When using IR speakers, remember to connect one speaker to the left channel and one to the right channel.
Summary of Contents for Lasso
Page 1: ...lasso INSTALLER GUIDE ...