CB6000 Main Page
Step 4: Testing Room
• Turn the projector ON from the CB6000.
• Switch to each input and make sure that the projector switches properly.
• Insert an audio source into the wall plates and ensure that the audio is heard and follow the appropriate projector inputs.
•
HDMI
– audio heard will be from the HDMI source (CM3000 input 3).
•
PC
– audio heard will be from the Decora VGA + Audio insert (CM3000 input 1).
•
Video
– audio heard will be from the RED/WHITE RCA connectors on the Decora RCA insert (CM3000 input 2).
• Turn the projector OFF from the CB6000.
• Raise and lower the volume.
• Test the MUTE button to ensure that the audio mutes. Pressing the mute button toggles the mute ON/OFF. Also raising
and lowering the volume brings the audio out of mute.
• Test FREEZE and BLANK if available on the CB6000.
• Repeat the above tests from the Encore software if it has been installed on the teacher’s computer.
• Test the microphone by turning the mic on and speaking. Walk around the room to ensure strong coverage from all areas.
CB6000 Page 2
7
CB2000 Default Setup
CB2050 Default Setup
