Using a TranzPort with DJ-1800
Page
5 of 7
“Song position” display mode
When the TranzPort is in “Song position” display mode, it will show the information below:
The bottom left section of the display shows the current progress through the song. In the picture above, the
song is at the very beginning. As the song plays, the progress increases, as shown below:
The position of the song matches the position on the DJ-1800 song progress bar, as shown below.
“Crossfader” display mode
When the TranzPort is in “Crossfader” display mode, it will show the information below:
This matches the on-screen DJ-1800 Crossfader display:
On the TranzPort LCD screen, the crossfader has a “1” at its left-hand side. This indicates that the current CD
Player (CD Player 1, in this case) is selected for use on the left-hand side of the DJ-1800 crossfader, as can be
seen in the picture above.
Conversely, the LCD version of the crossfader has a “0” at the right. This indicates that the current CD player
isn’t
selected for the right-hand side of the crossfader, as can be seen in the picture above.
These 1’s and 0’s enable you to see, on the TranzPort LCD screen, what will happen if you move the crossfader
to the left or to the right. So, in the example above, if you move the crossfader to the right, then the CD Player’s
volume will decrease to zero as it approaches the right-hand side of the crossfader.
