Control Panel
MANUAL
10
7
5
3
1
2
3
4
5
6
7
(not visible on picture)
Control Panel
1. Program: When the belt is stationary, this button may be used to
choose one of the pre-set programs (manually, P1-P12)
2. Mode: When the belt is stationary, choose the mode (time, distance,
number of calories)
3. Start: Starts the machine.
4. Stop: Slows the belt to a standstill.
5. Speed: Increase/decrease the speed of the belt during use.
6. Pre-set speed: While the belt is moving, these buttons
(3, 5, 7 or 10km/h) may be used for direct adjustment of the speed.
7. Safety catch: If the safety control is pulled out, the display will
show “-“ and the machine will emit a warning sound. The belt will
stop and will only start again once the safety control has been secured
in place once more.
