4.Open the tank door, place the tank in the holder and use the chain to hold the tank. Connect
the regulator as shown in
Figure 5.
Screw the black handle clock-wise to tighten. Turn the
handle counterclock-wise to remove. The hose must point down. Open the control door and
check that the valve is turned all the way clockwise to the “OFF” position. Open the tank
valve. Apply a solution of soapy water to the tank-regulator connection and to the valve-hose
connection to check for leaks. If soap bubbles continue to form, the connection has a leak. If
a leak is found, close the tank valve and tighten all connections.
NEVER USE A FLAME TO CHECK FOR LEAKS.
7
Summary of Contents for FHTA80087D
Page 8: ...8 Figure 5...
