IMPORTANT SAFETY INFORMATION ABOUT
PROPANE (LP) GAS
A self contained LP-gas cylinder for use with this appliance must have a capacity of 20 lbs.
and must be equipped with a Type 1 connector and an OPD (overfill protection device). See
Figure 1.
The LP-gas supply cylinder to be used must be constructed and marked in accordance with
the specification for LP-gas cylinders of the U.S. Department of Transportation (DOT) or the
National Standard of Canada,
CAN/CSA-B339, Cylinder, Sphere and Tubes for the
Transportation of Dangerous Goods
.
The cylinder supply system must be arranged for vapor withdrawal.
The cylinder used must include a collar to protect the cylinder valve.
This appliance shall be used only outdoors in a well-ventilated space and shall not be
used in a building, garage or any other enclosed space.
When this appliance is not is use, the gas must be turned off at the supply cylinder.
Storage of this appliance indoors is permissible only if the cylinder is disconnected and
removed from the appliance.
Cylinders must be stored outdoors in a well-ventilated area out of the reach of
children .Disconnected cylinders must have threaded valve plugs tightly installed and
must not be stored in a building, garage or any other enclosed areas.
CSA (Canadian Standards Association) certified to ANSI Z21.97
•
CSA 2.41-2012 “ Outdoor
Decorative Gas Appliances” The gas hose is routed through a “U” bolt to prevent the hose
from coming in contact with the burner. DO NOT remove the hose from the “U” bolt. See
Figure 2.
Figure 1
Figure 2
SPECIFICATIONS
e
ri
f
w
o
L
r
h
/
u
t
B
0
0
0
,
0
3
r
h
/
u
t
B
0
0
0
,
55
T
U
P
N
I
Propane Regulator Pressure
11 in / 2.74 kPa water column
Natural Gas Minimum Inlet
Pressure
7 in / 1.74 kPa water column
Clearances to combustible surfaces Sides
60 in./152cm
Top: 72 in. / 183 cm
4
Regulator hose
pointed down
Summary of Contents for FHTA80087D
Page 8: ...8 Figure 5...
