3
3
Track
FASSUNI_REV_A01
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.2
2.3
2.4
2.1
2.4
2.5
2.6
With the help of a friend, flip the Rack right
side up.
Lower the Rack onto the tracks while
aligning the Feet with the Stud Plates in the
Tracks.
Loosely secure the Feet to the track using
M8 x 16 x 1.6SS Flat Washers and M8 Nyloc
Nuts (Items 6 & 7).
5MM
13MM
Before tightening the Feet to the tracks,
position the Rack so that it sits level to the
ground, not the vehicles roof line, or
slanting slightly down toward the front.
First tighten the Feet to the tracks, then
center the rack left to right and
fully tighten the fasteners from 2.3.
Lastly set the height and fully tighten the
M8 x 16 Button Head Bolts and M8 Nyloc
Nuts (Items 5 & 7).
Check clearance with sunroof operation and
any accessories fitted.
25mm clearance is needed between roof and
table bracket, if fitted.
Place M8 Nut Caps (Item 8) over all of the
Nyloc Nuts.
Before placing the Rack onto the vehicle,
slide the Stud Plates (Item 3) removed in
2.3 into the track.
6
7
