2
1
4
WTAN063_REV_A01
4
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
FIT AND SECURE
2
If you are fitting the tap apply thread tape to
the thread of the tap.
This will allow the Tap to be aligned to your
chosen position and have a water tight seal.
Sold Seperately
Tap - WTAN059
2.4
2.5
2.6
Open the Strap and place the Pro Water Tank
onto the rack. Close the Strap over the
Water Tank as shown.
Ensure that the Tank and the Strap are
aligned before fully tightening the M8 Nyloc
on the Strap and the M8 x 20
Button Head Bolt on the Catch (Item 2).
Once secured, place a M8 Nut Cap
(Item 6) over the Nyloc Nut.
Loosely fit the Pro Tank Strap (Item 1) to the
rack using the M8 x 16 Hex Bolt From 2.2 and
M8 Nyloc Nut (Item 4) as shown.
24MM
13mm
13mm
SLII SIDE PROFILE FITMENT
