TBRA016_REV_A00
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
5
10
8
9
7
13
Push Up To Open
SIDE MOUNTING WITH FOOT RAIL
3
2.2
2.3
2.4
2.1
3.4
3.5
3.6
Place the latch (item 13) into the rack,
lining up the mounting hole in the latch
with the nyloc nut inserted in diagram
2.3. Secure the latch in position using the
M8x20 Button head bolt and M8 flat washer
(items 11 and 12)
Open the latch by pushing on the
latch release and slide the table into
position. Check that the table has no
forward/backward movement when the
latch is closed. If it does, loosen the nyloc
nuts (item 6) from diagram 3.1 and adjust
so that the table has no movement in the
slides when the latch is closed.
A small padlock can be used through the
hole in the latch release should you wish
to lock the table.
5MM
10MM
Fasten items 7,8,9 and 10 as shown.
12
11
4MM
