TBRA016_REV_A00
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
3
MOUNTING THE TABLE AT THE REAR OF THE RACK
2
2.2
2.3
2.4
2.1
2.1
2.2
2.3
Working underneath and from the rear of
the rack, slide two M8x16 bolts (item 3)
into the second and fourth slats of the rack
through the machined slots.
Loosely secure the table slides (item1) to
the rack using items 4 and 5 as shown.
Cut the T-slot rubber (item 2) to
suite the width of your rack and insert
into the rear T-slot of the first slat by
pinching/squeezing the sides of the rubber
together and pushing/rolling the rubber
into the T-slot as shown.
13MM
Depending on the width of your table, space
the two table slides either 750mm or
550mm apart. Tighten all the nyloc nuts
and place a M8 nut cap (item 6) over each
nyloc nut. See diagram 2.1
4th
2th
Rear of Rack
(Shown Upside Down)
6
4
5
1
3
750mm or 550mm
2
