![background image](http://html1.mh-extra.com/html/fronius/vr-1530-11/vr-1530-11_operating-instructions-manual_2339456018.webp)
18
VR 1530-11 / -12 / -22 / -30
A matching version of the VR 1530 is available for each version of the main wirefeeder VR
1500:
-
VR 1500-11: VR 1530-11 (11 m/min) (433.07 ipm.)
-
VR 1500-12: VR 1530-12 (12 m/min) (472.44 ipm.)
-
VR 1500-22: VR 1530-22 (22 m/min) (866.14 ipm.)
-
VR 1530-30: VR 1530-30 (30 m/min) (1181.10 ipm.)
VR 1530-KD
The VR 1530-KD is available in conjunction with the KD 7000 cold-wire feeder.
System require
-
ments
System requirements for integrating a VR 1530:
1. Power source with
-
Firmware UST 3.10.22 or higher
-
Conversion kit for enhanced motor supply, 55V/8A
2. 1 wirefeed hose (from the unreeling device or bulk wire container to the VR 1530)
3. 1 wirefeed hose (from the VR 1530 to the VR 1500)
4. Suitable model of VR 1500 wirefeeder (main wirefeeder with torch central connector)
-
Firmware SR41 1.70.16 or higher
-
Conversion kit for PMR4000 PullMig controller
-
Installation kit for VR 1500 ”Abspul-VR” unreeling device
5. Control cable, 6m, for unreeling-type wirefeeders
Applicational ex
-
ample: VR 1530-
22 used as an un
-
reeling-type wire
-
feeder
The applicational example given below shows an industrial robot being used with a mount
-
ed VR 1500 robot wirefeeder combined with a VR 1530-22 unreeling-type wirefeeder.
VR 1500 robot wirefeeder combined with VR 1530-22 unreeling-type wirefeeder
(1)
TPS 5000 power source, with:
- Software update from the Fronius databank
- Enhanced motor supply: 55 V / 8 A
(2)
Base stand
(3)
FK 4000 R cooling unit
(4)
Robot interface (e.g. DeviceNet)
(14)
(16)
(17)
(15)
(10)
(9)
(12)
(11)
(7)
(6)
(4)
(13)
(2)
(1)
(3)
(8)
(5)